Vapour Jet Refrigeration Trainer

Product Description

Total Equipment isskid mounted in SS 40 x40 Frame Structure with Castor wheels. All wetted partsalso made of SS-304 Vapour jet compressor

d minconvergent-divergent nozzle: approx. 1,7mm

d min mixing jet:approx. 7mm Condenser Tank: approx. 3,5L

Pipe coil area:approx. 0,17m2

Evaporator

Tank: approx. 3,5L

Heater power: 4x125W

Vapour generator

Refrigerant tank:approx. 0,75L

Water jacket:approx. 9L

Heater power: 2kW

Pump

Max. Flow rate:approx. 1,7L/min

Max. Head: approx.70mWS

Measuring ranges

Current: 0-2,5A,Voltage: 0-230VAC Temperature: 10x -20-200C Pressure: 2x 0-10bar / 2x-1-1,5bar

Flow rate (coolingwater): 6-75g/s Required for operation
230V, 50Hz, 1 phase

230V, 60Hz, 1 phase

Touch screen basedFully automatic system with password protection

Data acquisitionshould be Remotely operated by Smart phone, Tablets, PC, laptops via Ethernetand Wi-fi

Should be equippedwith all safety protections

Flow visualization shouldbe available in the DAQ System

Should be equippedwith both manual and auto operation

Power consumption ofindividual system, all sensors™ data should be display and logged automaticallySystem should have software for operating, data logging, processing and datadisplaying

Performancevariables (e.g., Heating/Cooling COP, Heating / Cooling load etc..) should beautomatically calculated and displayed and should be stored in pen drive alsoalong with PC. Instruments should be provided with 3D drawing of completeequipment along with the name and make of all standard components used in the testrig

Each rig should have small aestheticallyappealing poster with schematic diagram and basic working detail.